Aging Scaled Brownian Motion

Scaled Brownian motion (SBM) is widely used to model anomalous diffusion of passive tracers in complex and biological systems. It is a highly non-stationary process governed by the Langevin equation for Brownian motion, however, with a power-law time dependence of the noise strength. Here we study the aging properties of SBM for both unconfined and confined motion. Specifically, we derive the ensemble and time averaged mean squared displacements and analyze their behavior in the regimes of weak, intermediate, and strong aging. A very rich behavior is revealed for confined aging SBM depending on different aging times and whether the process is sub- or superdiffusive. We demonstrate that the information on the aging factorizes with respect to the lag time and exhibits a functional form, that is identical to the aging behavior of scale free continuous time random walk processes. While SBM exhibits a disparity between ensemble and time averaged observables and is thus weakly non-ergodic, strong aging is shown to effect a convergence of the ensemble and time averaged mean squared displacement. Finally, we derive the density of first passage times in the semi-infinite domain that features a crossover defined by the aging time.Comment: 10 pages, 8 figures, REVTe

Epidemiology and the agreement rate of serological tests in human brucellosis in North East of Iran

Background: Brucellosis still remains a major health problem with different symptoms and various diagnostic methods. Diagnostic methods of brucellosis are usually based on detecting specific antibodies in the patient’s serum. Nowadays, many serological tests are applied for the diagnosis of human brucellosis. Most routine tests are serum agglutination tests based on Wright and 2-Mercaptoethanol (2-ME). Objectives: The aim of this study (cross sectional study) was to evaluate the prevalence of brucellosis and assess the degree of agreement among serum samples of suspected brucellosis serological tests routinely performed in Mashhad, Iran. Patients and Methods: This study was conducted in Mashhad from August 2011 to September 2012. Sera (2 - 3 mL) were collected from 83 cases suspected of brucellosis among 594 patients. Ten serum samples were collected from healthy subjects as control sera. Rose Bengal test for initial screening and Wright and 2 ME as standard tests were conducted to determine antibody titers. Thereafter, IgG and IgM levels were determined by the Enzyme Linked Immunosorbent Assay (ELISA) method. Results: Among 83 serum samples, Rose Bengal test was able to identify 20 (12%) positive specimens; the standard tube agglutination test was able to detect 30 (18%) positive samples, and the ELISA IgG and ELISA IgM were able to trace 42 (21%) and 13 (6.5%) positive samples, respectively. Ten control samples had negative results for the ELISA method. The results were calculated by the Kappa formula. The highest level of agreement was among 1 = KRB-SAT tests and the lowest level of agreement was among tests K ELISA IgM-IgG = 0.30. Conclusions: According to the results, brucellosis has remained endemic in this region. Most cases were detected by ELISA IgG. The highest kappa agreements were between tests KRB-SAT, KRB-IgG and KSAT-IgG, while the lowest levels of agreement were between tests SAT-IgM and ELISA IgM-IgG. Considering that ELISA IgM results are covered by SAT and ELISA IgG test results, applications of this test do not seem necessary. © 2015, Infectious Diseases and Tropical Medicine Research Center

Complementary and alternative therapies to relieve labor pain: A comparative study between music therapy and Hoku point ice massage.

BACKGROUND & AIM Pain is a common experience for women during labor. In the present study, we compared the effect of two types of non-pharmacological pain relief methods "music therapy" and "Hoku point ice massage" on the severity of labor pain. METHODS This prospective, randomized, controlled trial was conducted in Shahrekord, Iran, from September 2013 to June 2014. We randomly assigned 90 primiparous women who expected a normal childbirth into three groups: group "A" received music therapy, group "B" received Hoku point ice massage, and group "C" received usual labor care. At the beginning of the active phase (4 cm cervical dilation) and before and after each intervention (at dilations 4, 6, and 8 cm), the intensities of labor pain were measured using Visual Analogue Scale (VAS). RESULTS At the beginning of the active phase, the mean VAS scores were 5.58 ± 1.29, 5.42 ± 1.31, and 6.13 ± 1.37 in the women in groups "A," "B," and "C," respectively (P > 0.05). After the intervention, the mean pain scores were significantly lower at all of the time points in groups "A" and "B" than in group "C" women (P  0.05). CONCLUSIONS Music therapy and Hoku point ice massage are easily available and inexpensive methods and have a similar effect in relieving labor pain

The effects of breathing techniques on pain intensity of burn dressing

زمینه و هدف: درد سوختگی یکی از شدیدترین و مداوم ترین انواع درد می باشد و یکی از زمان هایی که معمولاً بیماران سوخته بیشترین میزان درد را تجربه می کنند، زمان تعویض پانسمان است. مطالعه حاضر با هدف تعیین تاثیر تکنیک های تنفسی بر شدت درد پانسمان در بیماران مبتلا به سوختگی صورت گرفت. روش بررسی: در این مطالعه کارآزمایی بالینی تعداد 68 بیمار مرد مراجعه کننده به بخش سوختگی مرکز آموزشی درمانی آیت اله کاشانی شهرکرد از طریق نمونه گیری آسان هدفمند انتخاب و سپس بطور تصادفی در یکی از گروه های مداخله یا کنترل توزیع شدند. گروه مداخله تحت مداخله تکنیک های تنفسی طی انجام پانسمان قرار گرفتند و برای گروه کنترل مراقبت روتین به اجرا در آمد. شدت درد پانسمان سوختگی در دو گروه با استفاده از ابزار سنجش درد دیداری (Visual analogue scale) ارزیابی و مقایسه گردید. یافته ها: میانگین نمره شدت درد در بدو پانسمان سوختگی در گروه مداخله 2/02±6/32 و در گروه کنترل 1/98±5/90 بود که پس از مداخله نمره شدت درد در گروه مداخله به 1/46±3/66 و در گروه کنترل به 1/38±4/80 کاهش یافت که این کاهش معنادار بود (0/04=P). نتیجه گیری: بکارگیری تکنیک های تنفس می تواند در کاهش قابل توجه شدت درد پانسمان سوختگی مؤثر باشد؛ لذا به پرستاران بخش های سوختگی و اورژانس پیشنهاد می گردد جهت تخفیف درد ناشی از پانسمان سوختگی، علاوه بر استفاده از داروهای ضد درد، بیماران را تشویق به انجام تمرینات تنفسی مکرر طی انجام پانسمان بنمایند

Purification and Characterization of Recombinant Darbepoetin Alfa from Leishmania tarentolae

Darbepoetin alfa is a biopharmaceutical glycoprotein that stimulates erythropoiesis and is used to treat anemia, which associated with renal failure and cancer chemotherapy. We herein describe the structural characterization of recombinant darbepoetin alfa produced by Leishmania tarentolae T7-TR host. The DNA expression cassette was integrated into the L. tarentolae genome through homologous recombination. Transformed clones were selected by antibiotic resistance, diagnostic PCRs, and protein expression analysis. The structure of recombinant darbepoetin alfa was analyzed by isoelectric focusing, ultraviolet–visible spectrum, and circular dichroism (CD) spectroscopy. Expression analysis showed the presence of a protein band at 40 kDa, and its expression level was 51.2 mg/ml of culture medium. Darbepoetin alfa have 5 isoforms with varying degree of sialylation. The UV absorption and CD spectra were analogous to original drug (Aranesp), which confirmed that the produced protein was darbepoetin alfa. Potency test results revealed that the purified protein was biologically active. In brief, the structural and biological characteristics of expressed darbepoetin alfa were very similar to Aranesp which has been normally expressed in CHO. Our data also suggest that produced protein has potential to be developed for clinical use. © 2016, Springer Science+Business Media New York

Shape optimization of microvascular composites used in active cooling applications

Inspired by microchannels networks in biological systems, microvascular composites are being used for various applications including active cooling, autonomic healing, and sensing. The recent development of a manufacturing technique for microvascular composites based on a sacrificial fiber approach has enabled the creation of complex networks of microchannels embedded in composite parts [1]. Motivated by these recent improvements in manufacturing of microvascular composites, we study design of an actively cooled composite plate. We examine the impact of microchannels configuration on the thermal response of the microvascular composite. Here, the composite plate is subjected to a heat flux that causes a high surface temperature in the absence of the active cooling by microchannels. The objective of this study is to determine the optimal configuration of the microchannels to maximize the thermal efficiency of microchannels to keep the domain temperature below a critical temperature value. We present a new gradient-based Isogeometric Interface-enriched Generalized Finite Element Method (IIGFEM) [2–4] optimization scheme that allows for the accurate and efficient extraction of the sensitivity of objective functions and constraints on the design parameters that define the geometry of the microchannels. At the heart of the modeling effort, the IIGFEM allows for the very accurate and efficient capture of the thermal impact of the embedded microchannel network on the thermal field in the composite part. Because the microchannels diameters are typically much smaller than other characteristic dimensions of the problem, we model microchannels as line (or curve) sinks. The IIGFEM solver allows for the capture of curved and branched microchannels over a mesh that does not conform to the geometry of the microchannels. One of the key challenges associated with the conventional finite element-based shape optimization of microvascular composites is the large mesh distortion that often takes place during the optimization process, as the finite element mesh must conform to the evolving microstructural elements. This mesh distortion may affect the accuracy of the optimum solution. Because of the stationary nature of the nonconforming mesh used by the IIGFEM, the issue of mesh distortion disappears. In this study, we adopt an isogeometric IGFEM-based adjoint shape sensitivity approach, which is simplified by the fact that only the enrichment (interface) nodes move, appear or disappear during the shape optimization process. To demonstrate the performance of the method, a set of microstructural shape optimization problems for the design of microvascular composites are presented

Simulation of the microlevel damage evolution in polymer matrix composites

A 3D Isogeometric Interface-Enriched Generalized Finite Element Method (IIGFEM) is developed to analyze problems with complex, discontinuous gradient fields commonly observed in the structural analysis of heterogeneous materials including polymer matrix composites [1]. In the proposed approach, the mesh generation process is significantly simplified by utilizing simple structured meshes that do not conform to the complex microstructure of the heterogeneous media. Non-Uniform Rational B-Splines, commonly used in computer-aided design, are adopted in the IIGFEM to augment the finite element approximation space and capture the weak discontinuity present along material interfaces. The IIGFEM offers many advantages, such as the simplicity and accuracy of numerical integration, the straightforward implementation of essential boundary conditions, and the flexibility in the choice of the local solution refinement The ability to model complex material interfaces and the mesh independence are two of key features of the IIGFEM that enable it to tackle problems with evolving material response, such as computational study of damage in solids. Here, we utilize the IIGFEM scheme to study the impact of microstructural details on the initiation and evolution of the damage in polymer matrix composites. For this purpose, in this study, we incorporate a three-parameter isotropic damage model [2] into our IIGFEM solver to capture the fracture response of the matrix in a unidirectional composite layer. To bypass numerical issues associated with mesh bias, we use a viscous regularization scheme proposed by Simo and Ju [3]. The numerical stability of the proposed approach is studied and its advantages and limitations are discussed in detail. Finally, a number of numerical examples are presented to demonstrate the effect of RVE size and filler volume fraction on the damage behavior of fiber-reinforced polymer matrix composites. REFERENCES [1] Safdari, M., Najafi, A.R., Sottos, N.R., Geubelle, P.H. An Isogeometric Interface-Enriched Generalized Finite Element Method (IGFEM) for problems with complex discontinuous gradient field. Submitted (2014). [2] Matous, K., Kulkarni, M.G., Geubelle, P.H. Multiscale cohesive failure modeling of heterogeneous adhesives. Journal of the Mechanics and Physics of Solids. 2008, 56, 1511–1533. [3] Simo, J.C., Ju, J.W. Strain- and stress-based continuum damage models—ii. computational aspects. International Journal of Solids and Structures. 1987, 23(7), 841–869

A NURBS-based interface-enriched generalized finite element scheme for the computational analysis and design of high temperature microvascular composites

Computational studies on multifunctional microvascular composite materials for high temperature application have focused on simple microchannel geometries [1–2]. Motivated by recent advances in the manufacturing of microvascular composites based on a sacrificial fiber technique that allows a complex network of curved microchannels to be embedded in the material [3], we develop an Interface Enriched Generalized Finite Element Method (IGFEM) [4] with Non-Uniform Rational B-Splines (NURBS) to analyze the impact of the microchannel network on the thermal field in the composite component [5]. By capturing the gradient discontinuity present at the microchannels, the method is able to simulate efficiently and accurately the thermal response of the microvascular composite without the need for a mesh that conforms to the geometry of the microchannels. We show that near-optimal convergence rate can be achieved and that IGFEM is more accurate than standard finite element method for coarse meshes when the enrichment functions are constructed using the NURBS description of the curved microchannels. Verification studies conducted against a detailed multiphysics model based on the Navier–Stokes equation for the fluid shows that the much simpler line source/sink model is very accurate for problems involving microvascular plates and fins. Various application problems are presented to demonstrate the efficiency, flexibility and accuracy of the proposed method. REFERENCES [1] Soghrati, S., Thakre, P.R., White, S.R., Sottos, N.R., Geubelle, P.H. Computational modeling and design of actively-cooled microvascular materials. Int. J. Heat Mass Transfer. 2012, 55, 5309–5321 [2] Soghrati, S., Najafi, A.R., Hughes, K.M., Lin, J.H., White, S.R., Sottos, N.R., Geubelle, P.H. Computational analysis of actively-cooled 3D woven microvascular composites using a stabilized interface-enriched generalized finite element method. Int. J. Heat Mass Transfer. 2013, 65, 153–164. [3] Esser-Kahn, A.P., Thakre, P.R., Dong, H., Patrick, J.F., Vlasko-Vlasov, V.K., Sottos, N.R., Moore, J.S., White, S.R. Three-dimensional microvascular fiber-reinforced composites. Advanced Materials. 2011, 23, 3654–3658. [4] Soghrati, S., Aragón, A.M., Duarte, C.A., Geubelle, P.H. An interface-enriched generalized FEM for problems with discontinuous gradient fields. Int. J. Numer. Methods Eng. 2012, 89, 991–1008. [5] Tan, M.H.Y., Safdari, M., Najafi, A.R., Geubelle, P.H. A NURBS-based interface-enriched generalized finite element scheme for the thermal analysis and design of microvascular composites. 2014 (submitted)